ESA 18 MK BT

The Dynavox ESA-18 MK BT is the successor to the E-SA18 stereo mini amplifier, which has been successful for many years. Compared to its predecessor, the device has a completely revised full metal housing with a massive 4mm front panel, slightly different dimensions and BT reception.

The Dynavox ESA-18 MK BT has 2 line inputs and a microphone input. The volume and echo of the microphone input can be adjusted. Switchable loudness, record out, separate treble and bass controls as well as an auto-standby control that can be switched off (device switches off automatically after approx. 30 minutes without a signal output) complete the extensive equipment.

Technical specifications:

Performance: 2 x 75W

Frequency Response: 20Hz - 20kHz (3dB)

Signal to noise ratio: > 88dB

Input sensitivity (RCA input): 150 mV / 300 mV (SIGNAL IN switchable Hi/Low)

Input sensitivity (microphone input): 3mV

Distortion factor: <0.1%

Inputs: 2 x cinch stereo, 1 x microphone jack 6.3 mm

Outputs: 1 x REC cinch stereo, 1 x BT, terminals for 2 speakers

supply voltage: 230V/ 50Hz

Dimensions (W x H x D): 220x50x230mm

Colour: black silver

Weight: 2.1kg

Further information in terms of the Ecodesign Directive

Power consumption in off mode <0.4 W

Power consumption in auto standby mode <0.4 W

No networked standby

mode Duration without input signal until auto standby: 15 min. (auto standby can be switched off). The wireless network port (BT) is disabled (turned off) using the source selector switch (BT/Line).